网上棋牌游戏

主页 > 新闻资讯 > 展览新闻 > Position: Home > News > Exhibition News >
The main structure of the material structure of the exhibition stand
Published: 2019-09-05 | Author: admin | Hits:
Wall materials and floor materials. This is the most basic material. Different materials show different effects. When selecting wall materials, preference is given to wall tiles or paint, and sometimes they are used. Wall coverings, and floor materials, because taking into account the participation in the exhibition is not a one-time use, the exhibition structure will choose environmentally friendly materials, can be reused, common is the composite floor and natural stone, textile products are also widely used.

There are two kinds of decorative materials, one is decorative line board, and the other is top material decorative line board, mainly wall panel and cornice line foot. These two decorative materials can express better effect, and The top material can add a tall effect to the design of the booth. The most commonly used materials are paper plasterboard and plastic gusset. Decorative plasterboard is also a better choice. The booth design can express the decoration effect better.

Often companies participating in the exhibition must deal with exhibition design companies. Then, exhibition companies generally have several types of exhibition profile construction methods, and everyone can make reasonable choices according to their own needs.

1, exhibition profile construction-wooden structure, this structure is mainly composed of 9 centimeter plate keel, each 9 centimeter plate is 1200x2400mm, each plate can be made into about 1 square wall, that is, half of the panel, half of the keel, Other structures may be made of sheet metal. When the wall needs t-bearing, the stand construction needs 12% of sheet material, which can make the wire difficult. If the surface needs to be painted or painted, the wood board is required. Put the putty powder on the surface before baking, but pay attention to operating in a dust-free space. The surface of the wooden structure is divided into Boeing film, fireproof board, latex paint, spray paint, and baking paint. His advantages are that the structure is diverse and the structure is strong The disadvantage is waste, which is not good for environmental protection.

2, exhibition profile construction-truss structure, this structure has obvious advantages, simple, low cost, truss + inkjet combination is the best rule to save money, but the disadvantage is that there is no grade, it looks cheaper.

3, exhibition profile construction-profile structure, most of China's early profile structure was used as a standard booth, with eight barrel columns, flat aluminum, sheet material as a combination. Conventional standard beaches are divided into standard booths of 9 square meters and 18 square meters, which provides small companies with convenient and affordable ways to participate. After the 1990s, profiles were diversified, mainly aluminum square pillars. This profile structure allows booths to The shape is more diversified. The aluminum square column is divided into various models such as 4080P. The advantage is environmental protection. The Shanghai booth is economical to install and disassemble. The disadvantage is still the limited structural combination.

4, exhibition profile construction-lightweight modules, these structures are relatively mature abroad, the representative place is Germany, similar to the aluminum square pillars we use, but his combination is more flexible and can also be matched with cloth and The combination of wooden structures is more international in visual, simple and stylish, but people's acceptance in the country is not high. For many years, exhibitors of Shanghai Exhibition Construction Company have no concept of environmental protection and are accustomed to the sense of weight of wooden structures. There are still few exhibition halls. There are multinational companies, and European and American exhibitors are more commonly used.
Ranch